------ 已启动生成: 项目: ZERO_CHECK, 配置: Release x64 ------ 1>Checking Build System 1>CMake is re-running because D:/Build_Salome/SALOME-9.10.0/BUILD/SMESH/src/Tools/Verima/Gui/CMakeFiles/generate.stamp is out-of-date. 1> the file 'D:/Build_Salome/SALOME-9.10.0/SOURCES/SMESH/src/Tools/Verima/Gui/CMakeLists.txt' 1> is newer than 'D:/Build_Salome/SALOME-9.10.0/BUILD/SMESH/src/Tools/Verima/Gui/CMakeFiles/generate.stamp.depend' 1> result='-1' 1>CMake Deprecation Warning at CMakeLists.txt:19 (CMAKE_MINIMUM_REQUIRED): 1> Compatibility with CMake < 2.8.12 will be removed from a future version of 1> CMake. 1> 1> Update the VERSION argument value or use a ... suffix to tell 1> CMake that the project does not need compatibility with older versions. 1> 1> 1>CMake Deprecation Warning at D:/Build_Salome/SALOME-9.10.0/SOURCES/CONFIGURATION/cmake/SalomeMacros.cmake:27 (CMAKE_POLICY): 1> The OLD behavior for policy CMP0020 will be removed from a future version 1> of CMake. 1> 1> The cmake-policies(7) manual explains that the OLD behaviors of all 1> policies are deprecated and that a policy should be set to OLD only under 1> specific short-term circumstances. Projects should be ported to the NEW 1> behavior and not rely on setting a policy to OLD. 1>Call Stack (most recent call first): 1> CMakeLists.txt:34 (INCLUDE) 1> 1> 1>-- Building SALOMESMESH 9.10.0 from "unknown" 1>-- Looking for Salome KERNEL ... 1>-- ===> Reloading targets from LibBatch ... 1>-- ===> Reloading targets from HDF5 ... 1>-- Found Salome KERNEL: D:/Build_Salome/SALOME-9.10.0/W64/KERNEL 1>-- Setting C++ standard to 11 1>-- Python libs and interpreter versions are matching: 3.6.5 1>-- PThread directory matches what was previously exposed by another prereq, all good! 1>CMake Error at D:/Build_Salome/SALOME-9.10.0/SOURCES/CONFIGURATION/cmake/SalomeMacros.cmake:561 (MESSAGE): 1> Package SWIG couldn't be found - did you set the corresponing root dir 1> correctly? It currently contains 1> SWIG_ROOT_DIR=D:/Build_Salome/SALOME-9.10.0/W64/swig Append 1> -DSALOME_CMAKE_DEBUG=ON on the command line if you want to see the original 1> CMake error. 1>Call Stack (most recent call first): 1> D:/Build_Salome/SALOME-9.10.0/SOURCES/CONFIGURATION/cmake/FindSalomeSWIG.cmake:31 (SALOME_FIND_PACKAGE_AND_DETECT_CONFLICTS) 1> CMakeLists.txt:111 (FIND_PACKAGE) 1> 1> 1>-- Configuring incomplete, errors occurred! 1>See also "D:/Build_Salome/SALOME-9.10.0/BUILD/SMESH/CMakeFiles/CMakeOutput.log". 1>See also "D:/Build_Salome/SALOME-9.10.0/BUILD/SMESH/CMakeFiles/CMakeError.log". 1>CMake Configure step failed. Build files cannot be regenerated correctly. Attempting to stop IDE build. 1>E:\software\VSInstall\Common7\IDE\VC\VCTargets\Microsoft.CppCommon.targets(209,5): error MSB6006: “cmd.exe”已退出，代码为 1。 1>已完成生成项目“ZERO_CHECK.vcxproj”的操作 - 失败。 2>------ 已启动生成: 项目: BUILD_UI_PY_FILES_22, 配置: Release x64 ------ 3>------ 已启动生成: 项目: BUILD_UI_PY_FILES_24, 配置: Release x64 ------ 4>------ 已启动生成: 项目: BUILD_UI_PY_FILES_25, 配置: Release x64 ------ 5>------ 已启动生成: 项目: BUILD_UI_PY_FILES_4, 配置: Release x64 ------ 6>------ 已启动生成: 项目: BUILD_UI_PY_FILES_5, 配置: Release x64 ------ 5>D:\Build_Salome\SALOME-9.10.0\W64\Python\python.exe: Error while finding module specification for 'PyQt5.uic.pyuic' (ModuleNotFoundError: No module named 'PyQt5.uic') 5>E:\software\VSInstall\Common7\IDE\VC\VCTargets\Microsoft.CppCommon.targets(209,5): error MSB6006: “cmd.exe”已退出，代码为 1。 5>已完成生成项目“BUILD_UI_PY_FILES_4.vcxproj”的操作 - 失败。 3>D:\Build_Salome\SALOME-9.10.0\W64\Python\python.exe: Error while finding module specification for 'PyQt5.uic.pyuic' (ModuleNotFoundError: No module named 'PyQt5.uic') 3>E:\software\VSInstall\Common7\IDE\VC\VCTargets\Microsoft.CppCommon.targets(209,5): error MSB6006: “cmd.exe”已退出，代码为 1。 3>已完成生成项目“BUILD_UI_PY_FILES_24.vcxproj”的操作 - 失败。 4>D:\Build_Salome\SALOME-9.10.0\W64\Python\python.exe: Error while finding module specification for 'PyQt5.uic.pyuic' (ModuleNotFoundError: No module named 'PyQt5.uic') 4>E:\software\VSInstall\Common7\IDE\VC\VCTargets\Microsoft.CppCommon.targets(209,5): error MSB6006: “cmd.exe”已退出，代码为 1。 4>已完成生成项目“BUILD_UI_PY_FILES_25.vcxproj”的操作 - 失败。 2>D:\Build_Salome\SALOME-9.10.0\W64\Python\python.exe: Error while finding module specification for 'PyQt5.uic.pyuic' (ModuleNotFoundError: No module named 'PyQt5.uic') 2>E:\software\VSInstall\Common7\IDE\VC\VCTargets\Microsoft.CppCommon.targets(209,5): error MSB6006: “cmd.exe”已退出，代码为 1。 2>已完成生成项目“BUILD_UI_PY_FILES_22.vcxproj”的操作 - 失败。 7>------ 已启动生成: 项目: BUILD_UI_PY_FILES_7, 配置: Release x64 ------ 8>------ 已启动生成: 项目: BUILD_UI_PY_FILES_8, 配置: Release x64 ------ 9>------ 已启动生成: 项目: BUILD_UI_PY_FILES_9, 配置: Release x64 ------ 10>------ 已启动生成: 项目: BUILD_UI_PY_FILES_12, 配置: Release x64 ------ 11>------ 已启动生成: 项目: BUILD_UI_PY_FILES_10, 配置: Release x64 ------ 12>------ 已启动生成: 项目: BUILD_UI_PY_FILES_11, 配置: Release x64 ------ 13>------ 已启动生成: 项目: BUILD_UI_PY_FILES_18, 配置: Release x64 ------ 6>D:\Build_Salome\SALOME-9.10.0\W64\Python\python.exe: Error while finding module specification for 'PyQt5.uic.pyuic' (ModuleNotFoundError: No module named 'PyQt5.uic') 6>E:\software\VSInstall\Common7\IDE\VC\VCTargets\Microsoft.CppCommon.targets(209,5): error MSB6006: “cmd.exe”已退出，代码为 1。 6>已完成生成项目“BUILD_UI_PY_FILES_5.vcxproj”的操作 - 失败。 14>------ 已启动生成: 项目: BUILD_UI_PY_FILES_13, 配置: Release x64 ------ 9>D:\Build_Salome\SALOME-9.10.0\W64\Python\python.exe: Error while finding module specification for 'PyQt5.uic.pyuic' (ModuleNotFoundError: No module named 'PyQt5.uic') 9>E:\software\VSInstall\Common7\IDE\VC\VCTargets\Microsoft.CppCommon.targets(209,5): error MSB6006: “cmd.exe”已退出，代码为 1。 9>已完成生成项目“BUILD_UI_PY_FILES_9.vcxproj”的操作 - 失败。 15>------ 已启动生成: 项目: BUILD_UI_PY_FILES_15, 配置: Release x64 ------ 10>D:\Build_Salome\SALOME-9.10.0\W64\Python\python.exe: Error while finding module specification for 'PyQt5.uic.pyuic' (ModuleNotFoundError: No module named 'PyQt5.uic') 10>E:\software\VSInstall\Common7\IDE\VC\VCTargets\Microsoft.CppCommon.targets(209,5): error MSB6006: “cmd.exe”已退出，代码为 1。 10>已完成生成项目“BUILD_UI_PY_FILES_12.vcxproj”的操作 - 失败。 8>D:\Build_Salome\SALOME-9.10.0\W64\Python\python.exe: Error while finding module specification for 'PyQt5.uic.pyuic' (ModuleNotFoundError: No module named 'PyQt5.uic') 8>E:\software\VSInstall\Common7\IDE\VC\VCTargets\Microsoft.CppCommon.targets(209,5): error MSB6006: “cmd.exe”已退出，代码为 1。 8>已完成生成项目“BUILD_UI_PY_FILES_8.vcxproj”的操作 - 失败。 7>D:\Build_Salome\SALOME-9.10.0\W64\Python\python.exe: Error while finding module specification for 'PyQt5.uic.pyuic' (ModuleNotFoundError: No module named 'PyQt5.uic') 7>E:\software\VSInstall\Common7\IDE\VC\VCTargets\Microsoft.CppCommon.targets(209,5): error MSB6006: “cmd.exe”已退出，代码为 1。 7>已完成生成项目“BUILD_UI_PY_FILES_7.vcxproj”的操作 - 失败。 16>------ 已启动生成: 项目: BUILD_UI_PY_FILES_16, 配置: Release x64 ------ 13>D:\Build_Salome\SALOME-9.10.0\W64\Python\python.exe: Error while finding module specification for 'PyQt5.uic.pyuic' (ModuleNotFoundError: No module named 'PyQt5.uic') 13>E:\software\VSInstall\Common7\IDE\VC\VCTargets\Microsoft.CppCommon.targets(209,5): error MSB6006: “cmd.exe”已退出，代码为 1。 13>已完成生成项目“BUILD_UI_PY_FILES_18.vcxproj”的操作 - 失败。 17>------ 已启动生成: 项目: BUILD_UI_PY_FILES_19, 配置: Release x64 ------ 18>------ 已启动生成: 项目: BUILD_UI_PY_FILES_2, 配置: Release x64 ------ 19>------ 已启动生成: 项目: _libSMESH_Swig_ready, 配置: Release x64 ------ 16>D:\Build_Salome\SALOME-9.10.0\W64\Python\python.exe: Error while finding module specification for 'PyQt5.uic.pyuic' (ModuleNotFoundError: No module named 'PyQt5.uic') 16>E:\software\VSInstall\Common7\IDE\VC\VCTargets\Microsoft.CppCommon.targets(209,5): error MSB6006: “cmd.exe”已退出，代码为 1。 16>已完成生成项目“BUILD_UI_PY_FILES_16.vcxproj”的操作 - 失败。 18>D:\Build_Salome\SALOME-9.10.0\W64\Python\python.exe: Error while finding module specification for 'PyQt5.uic.pyuic' (ModuleNotFoundError: No module named 'PyQt5.uic') 15>D:\Build_Salome\SALOME-9.10.0\W64\Python\python.exe: Error while finding module specification for 'PyQt5.uic.pyuic' (ModuleNotFoundError: No module named 'PyQt5.uic') 18>E:\software\VSInstall\Common7\IDE\VC\VCTargets\Microsoft.CppCommon.targets(209,5): error MSB6006: “cmd.exe”已退出，代码为 1。 18>已完成生成项目“BUILD_UI_PY_FILES_2.vcxproj”的操作 - 失败。 15>E:\software\VSInstall\Common7\IDE\VC\VCTargets\Microsoft.CppCommon.targets(209,5): error MSB6006: “cmd.exe”已退出，代码为 1。 15>已完成生成项目“BUILD_UI_PY_FILES_15.vcxproj”的操作 - 失败。 20>------ 已启动生成: 项目: BUILD_UI_PY_FILES_21, 配置: Release x64 ------ 21>------ 已启动生成: 项目: _SMeshHelper_ready, 配置: Release x64 ------ 22>------ 已启动生成: 项目: _SMeshPadderHelper_ready, 配置: Release x64 ------ 23>------ 已启动生成: 项目: PYCOMPILE_src_Tools_TopIIVolMeshPlug_1, 配置: Release x64 ------ 20>D:\Build_Salome\SALOME-9.10.0\W64\Python\python.exe: Error while finding module specification for 'PyQt5.uic.pyuic' (ModuleNotFoundError: No module named 'PyQt5.uic') 20>E:\software\VSInstall\Common7\IDE\VC\VCTargets\Microsoft.CppCommon.targets(209,5): error MSB6006: “cmd.exe”已退出，代码为 1。 20>已完成生成项目“BUILD_UI_PY_FILES_21.vcxproj”的操作 - 失败。 11>D:\Build_Salome\SALOME-9.10.0\W64\Python\python.exe: Error while finding module specification for 'PyQt5.uic.pyuic' (ModuleNotFoundError: No module named 'PyQt5.uic') 11>E:\software\VSInstall\Common7\IDE\VC\VCTargets\Microsoft.CppCommon.targets(209,5): error MSB6006: “cmd.exe”已退出，代码为 1。 11>已完成生成项目“BUILD_UI_PY_FILES_10.vcxproj”的操作 - 失败。 21>Waiting for swig wrappings !!! 21>The file D:/Build_Salome/SALOME-9.10.0/BUILD/SMESH/src/SMESH_SWIG/CMakeFiles/_SMeshHelper.dir/SMeshHelperPYTHON_wrap.cxx was created. 22>Waiting for swig wrappings !!! 22>The file D:/Build_Salome/SALOME-9.10.0/BUILD/SMESH/src/Tools/padder/meshjob/impl/CMakeFiles/_SMeshPadderHelper.dir/SMeshPadderHelperPYTHON_wrap.cxx was created. 12>D:\Build_Salome\SALOME-9.10.0\W64\Python\python.exe: Error while finding module specification for 'PyQt5.uic.pyuic' (ModuleNotFoundError: No module named 'PyQt5.uic') 12>E:\software\VSInstall\Common7\IDE\VC\VCTargets\Microsoft.CppCommon.targets(209,5): error MSB6006: “cmd.exe”已退出，代码为 1。 12>已完成生成项目“BUILD_UI_PY_FILES_11.vcxproj”的操作 - 失败。 14>D:\Build_Salome\SALOME-9.10.0\W64\Python\python.exe: Error while finding module specification for 'PyQt5.uic.pyuic' (ModuleNotFoundError: No module named 'PyQt5.uic') 14>E:\software\VSInstall\Common7\IDE\VC\VCTargets\Microsoft.CppCommon.targets(209,5): error MSB6006: “cmd.exe”已退出，代码为 1。 14>已完成生成项目“BUILD_UI_PY_FILES_13.vcxproj”的操作 - 失败。 24>------ 已启动生成: 项目: PYCOMPILE_src_Tools_Verima_0, 配置: Release x64 ------ 25>------ 已启动生成: 项目: PYCOMPILE_src_Tools_Verima_Base_0, 配置: Release x64 ------ 26>------ 已启动生成: 项目: PYCOMPILE_src_Tools_Verima_CreeDocuments_0, 配置: Release x64 ------ 27>------ 已启动生成: 项目: PYCOMPILE_src_Tools_Verima_Gui_0, 配置: Release x64 ------ 28>------ 已启动生成: 项目: PYCOMPILE_src_Tools_Verima_Stats_0, 配置: Release x64 ------ 29>------ 已启动生成: 项目: BUILD_UI_PY_FILES_6, 配置: Release x64 ------ 19>Waiting for swig wrappings !!! 19>The file D:/Build_Salome/SALOME-9.10.0/BUILD/SMESH/src/SMESH_SWIG_WITHIHM/CMakeFiles/_libSMESH_Swig.dir/libSMESH_SwigPYTHON_wrap.cxx was created. 30>------ 已启动生成: 项目: PYCOMPILE_src_Tools_YamsPlug_0, 配置: Release x64 ------ 31>------ 已启动生成: 项目: PYCOMPILE_src_Tools_blocFissure_0, 配置: Release x64 ------ 32>------ 已启动生成: 项目: PYCOMPILE_src_Tools_blocFissure_CasTests_0, 配置: Release x64 ------ 33>------ 已启动生成: 项目: PYCOMPILE_src_Tools_blocFissure_gmu_0, 配置: Release x64 ------ 34>------ 已启动生成: 项目: PYCOMPILE_src_Tools_blocFissure_ihm_0, 配置: Release x64 ------ 35>------ 已启动生成: 项目: PYCOMPILE_src_Tools_blocFissure_ihm_1, 配置: Release x64 ------ 27>Building Custom Rule D:/Build_Salome/SALOME-9.10.0/SOURCES/SMESH/src/Tools/Verima/Gui/CMakeLists.txt 27>CMake is re-running because D:/Build_Salome/SALOME-9.10.0/BUILD/SMESH/src/Tools/Verima/Gui/CMakeFiles/generate.stamp is out-of-date. 27> the file 'D:/Build_Salome/SALOME-9.10.0/SOURCES/SMESH/src/Tools/Verima/Gui/CMakeLists.txt' 27> is newer than 'D:/Build_Salome/SALOME-9.10.0/BUILD/SMESH/src/Tools/Verima/Gui/CMakeFiles/generate.stamp.depend' 27> result='-1' 27>CMake Deprecation Warning at CMakeLists.txt:19 (CMAKE_MINIMUM_REQUIRED): 27> Compatibility with CMake < 2.8.12 will be removed from a future version of 27> CMake. 27> 27> Update the VERSION argument value or use a ... suffix to tell 27> CMake that the project does not need compatibility with older versions. 27> 27> 27>CMake Deprecation Warning at D:/Build_Salome/SALOME-9.10.0/SOURCES/CONFIGURATION/cmake/SalomeMacros.cmake:27 (CMAKE_POLICY): 27> The OLD behavior for policy CMP0020 will be removed from a future version 27> of CMake. 27> 27> The cmake-policies(7) manual explains that the OLD behaviors of all 27> policies are deprecated and that a policy should be set to OLD only under 27> specific short-term circumstances. Projects should be ported to the NEW 27> behavior and not rely on setting a policy to OLD. 27>Call Stack (most recent call first): 27> CMakeLists.txt:34 (INCLUDE) 27> 27> 27>-- Building SALOMESMESH 9.10.0 from "unknown" 27>-- Looking for Salome KERNEL ... 27>-- ===> Reloading targets from LibBatch ... 27>-- ===> Reloading targets from HDF5 ... 27>-- Found Salome KERNEL: D:/Build_Salome/SALOME-9.10.0/W64/KERNEL 27>-- Setting C++ standard to 11 27>-- Python libs and interpreter versions are matching: 3.6.5 27>-- PThread directory matches what was previously exposed by another prereq, all good! 27>CMake Error at D:/Build_Salome/SALOME-9.10.0/SOURCES/CONFIGURATION/cmake/SalomeMacros.cmake:561 (MESSAGE): 27> Package SWIG couldn't be found - did you set the corresponing root dir 27> correctly? It currently contains 27> SWIG_ROOT_DIR=D:/Build_Salome/SALOME-9.10.0/W64/swig Append 27> -DSALOME_CMAKE_DEBUG=ON on the command line if you want to see the original 27> CMake error. 27>Call Stack (most recent call first): 27> D:/Build_Salome/SALOME-9.10.0/SOURCES/CONFIGURATION/cmake/FindSalomeSWIG.cmake:31 (SALOME_FIND_PACKAGE_AND_DETECT_CONFLICTS) 27> CMakeLists.txt:111 (FIND_PACKAGE) 27> 27> 27>-- Configuring incomplete, errors occurred! 27>See also "D:/Build_Salome/SALOME-9.10.0/BUILD/SMESH/CMakeFiles/CMakeOutput.log". 27>See also "D:/Build_Salome/SALOME-9.10.0/BUILD/SMESH/CMakeFiles/CMakeError.log". 27>E:\software\VSInstall\Common7\IDE\VC\VCTargets\Microsoft.CppCommon.targets(209,5): error MSB6006: “cmd.exe”已退出，代码为 1。 27>已完成生成项目“PYCOMPILE_src_Tools_Verima_Gui_0.vcxproj”的操作 - 失败。 29>Building Custom Rule D:/Build_Salome/SALOME-9.10.0/SOURCES/SMESH/src/Tools/Verima/Gui/CMakeLists.txt 29>CMake is re-running because D:/Build_Salome/SALOME-9.10.0/BUILD/SMESH/src/Tools/Verima/Gui/CMakeFiles/generate.stamp is out-of-date. 29> the file 'D:/Build_Salome/SALOME-9.10.0/SOURCES/SMESH/src/Tools/Verima/Gui/CMakeLists.txt' 29> is newer than 'D:/Build_Salome/SALOME-9.10.0/BUILD/SMESH/src/Tools/Verima/Gui/CMakeFiles/generate.stamp.depend' 29> result='-1' 29>CMake Deprecation Warning at CMakeLists.txt:19 (CMAKE_MINIMUM_REQUIRED): 29> Compatibility with CMake < 2.8.12 will be removed from a future version of 29> CMake. 29> 29> Update the VERSION argument value or use a ... suffix to tell 29> CMake that the project does not need compatibility with older versions. 29> 29> 29>CMake Deprecation Warning at D:/Build_Salome/SALOME-9.10.0/SOURCES/CONFIGURATION/cmake/SalomeMacros.cmake:27 (CMAKE_POLICY): 29> The OLD behavior for policy CMP0020 will be removed from a future version 29> of CMake. 29> 29> The cmake-policies(7) manual explains that the OLD behaviors of all 29> policies are deprecated and that a policy should be set to OLD only under 29> specific short-term circumstances. Projects should be ported to the NEW 29> behavior and not rely on setting a policy to OLD. 29>Call Stack (most recent call first): 29> CMakeLists.txt:34 (INCLUDE) 29> 29> 29>-- Building SALOMESMESH 9.10.0 from "unknown" 29>-- Looking for Salome KERNEL ... 29>-- ===> Reloading targets from LibBatch ... 29>-- ===> Reloading targets from HDF5 ... 29>-- Found Salome KERNEL: D:/Build_Salome/SALOME-9.10.0/W64/KERNEL 29>-- Setting C++ standard to 11 29>-- Python libs and interpreter versions are matching: 3.6.5 29>-- PThread directory matches what was previously exposed by another prereq, all good! 29>CMake Error at D:/Build_Salome/SALOME-9.10.0/SOURCES/CONFIGURATION/cmake/SalomeMacros.cmake:561 (MESSAGE): 29> Package SWIG couldn't be found - did you set the corresponing root dir 29> correctly? It currently contains 29> SWIG_ROOT_DIR=D:/Build_Salome/SALOME-9.10.0/W64/swig Append 29> -DSALOME_CMAKE_DEBUG=ON on the command line if you want to see the original 29> CMake error. 29>Call Stack (most recent call first): 29> D:/Build_Salome/SALOME-9.10.0/SOURCES/CONFIGURATION/cmake/FindSalomeSWIG.cmake:31 (SALOME_FIND_PACKAGE_AND_DETECT_CONFLICTS) 29> CMakeLists.txt:111 (FIND_PACKAGE) 29> 29> 29>-- Configuring incomplete, errors occurred! 29>See also "D:/Build_Salome/SALOME-9.10.0/BUILD/SMESH/CMakeFiles/CMakeOutput.log". 29>See also "D:/Build_Salome/SALOME-9.10.0/BUILD/SMESH/CMakeFiles/CMakeError.log". 29>E:\software\VSInstall\Common7\IDE\VC\VCTargets\Microsoft.CppCommon.targets(209,5): error MSB6006: “cmd.exe”已退出，代码为 1。 29>已完成生成项目“BUILD_UI_PY_FILES_6.vcxproj”的操作 - 失败。 36>------ 已启动生成: 项目: PYCOMPILE_src_Tools_blocFissure_materielCasTests_0, 配置: Release x64 ------ 37>------ 已启动生成: 项目: PYCOMPILE_src_Tools_padder_meshjob_impl_0, 配置: Release x64 ------ 38>------ 已启动生成: 项目: PYCOMPILE_src_Tools_Verima_Gui_1, 配置: Release x64 ------ 39>------ 已启动生成: 项目: PYCOMPILE_src_Tools_padder_spadderpy_0, 配置: Release x64 ------ 40>------ 已启动生成: 项目: PYCOMPILE_src_Tools_padder_spadderpy_gui_0, 配置: Release x64 ------ 41>------ 已启动生成: 项目: PYCOMPILE_src_Tools_padder_spadderpy_gui_1, 配置: Release x64 ------ 42>------ 已启动生成: 项目: PYCOMPILE_src_Tools_padder_spadderpy_plugin_0, 配置: Release x64 ------ 43>------ 已启动生成: 项目: PYCOMPILE_src_Tools_padder_unittests_0, 配置: Release x64 ------ 44>------ 已启动生成: 项目: QT_INSTALL_TS_RESOURCES_SMESHGUI_Homard_msg_en, 配置: Release x64 ------ 45>------ 已启动生成: 项目: QT_INSTALL_TS_RESOURCES_SMESHGUI_Homard_msg_fr, 配置: Release x64 ------ 38>Building Custom Rule D:/Build_Salome/SALOME-9.10.0/SOURCES/SMESH/src/Tools/Verima/Gui/CMakeLists.txt 38>CMake is re-running because D:/Build_Salome/SALOME-9.10.0/BUILD/SMESH/src/Tools/Verima/Gui/CMakeFiles/generate.stamp is out-of-date. 38> the file 'D:/Build_Salome/SALOME-9.10.0/SOURCES/SMESH/src/Tools/Verima/Gui/CMakeLists.txt' 38> is newer than 'D:/Build_Salome/SALOME-9.10.0/BUILD/SMESH/src/Tools/Verima/Gui/CMakeFiles/generate.stamp.depend' 38> result='-1' 38>CMake Deprecation Warning at CMakeLists.txt:19 (CMAKE_MINIMUM_REQUIRED): 38> Compatibility with CMake < 2.8.12 will be removed from a future version of 38> CMake. 38> 38> Update the VERSION argument value or use a ... suffix to tell 38> CMake that the project does not need compatibility with older versions. 38> 38> 38>CMake Deprecation Warning at D:/Build_Salome/SALOME-9.10.0/SOURCES/CONFIGURATION/cmake/SalomeMacros.cmake:27 (CMAKE_POLICY): 38> The OLD behavior for policy CMP0020 will be removed from a future version 38> of CMake. 38> 38> The cmake-policies(7) manual explains that the OLD behaviors of all 38> policies are deprecated and that a policy should be set to OLD only under 38> specific short-term circumstances. Projects should be ported to the NEW 38> behavior and not rely on setting a policy to OLD. 38>Call Stack (most recent call first): 38> CMakeLists.txt:34 (INCLUDE) 38> 38> 38>-- Building SALOMESMESH 9.10.0 from "unknown" 38>-- Looking for Salome KERNEL ... 38>-- ===> Reloading targets from LibBatch ... 38>-- ===> Reloading targets from HDF5 ... 38>-- Found Salome KERNEL: D:/Build_Salome/SALOME-9.10.0/W64/KERNEL 38>-- Setting C++ standard to 11 38>-- Python libs and interpreter versions are matching: 3.6.5 38>-- PThread directory matches what was previously exposed by another prereq, all good! 38>CMake Error at D:/Build_Salome/SALOME-9.10.0/SOURCES/CONFIGURATION/cmake/SalomeMacros.cmake:561 (MESSAGE): 38> Package SWIG couldn't be found - did you set the corresponing root dir 38> correctly? It currently contains 38> SWIG_ROOT_DIR=D:/Build_Salome/SALOME-9.10.0/W64/swig Append 38> -DSALOME_CMAKE_DEBUG=ON on the command line if you want to see the original 38> CMake error. 38>Call Stack (most recent call first): 38> D:/Build_Salome/SALOME-9.10.0/SOURCES/CONFIGURATION/cmake/FindSalomeSWIG.cmake:31 (SALOME_FIND_PACKAGE_AND_DETECT_CONFLICTS) 38> CMakeLists.txt:111 (FIND_PACKAGE) 38> 38> 38>-- Configuring incomplete, errors occurred! 38>See also "D:/Build_Salome/SALOME-9.10.0/BUILD/SMESH/CMakeFiles/CMakeOutput.log". 38>See also "D:/Build_Salome/SALOME-9.10.0/BUILD/SMESH/CMakeFiles/CMakeError.log". 38>E:\software\VSInstall\Common7\IDE\VC\VCTargets\Microsoft.CppCommon.targets(209,5): error MSB6006: “cmd.exe”已退出，代码为 1。 38>已完成生成项目“PYCOMPILE_src_Tools_Verima_Gui_1.vcxproj”的操作 - 失败。 46>------ 已启动生成: 项目: QT_INSTALL_TS_RESOURCES_SMESHGUI_Homard_msg_ja, 配置: Release x64 ------ 47>------ 已启动生成: 项目: QT_INSTALL_TS_RESOURCES_SMESH_images, 配置: Release x64 ------ 48>------ 已启动生成: 项目: QT_INSTALL_TS_RESOURCES_SMESH_msg_en, 配置: Release x64 ------ 49>------ 已启动生成: 项目: QT_INSTALL_TS_RESOURCES_SMESH_msg_fr, 配置: Release x64 ------ 50>------ 已启动生成: 项目: QT_INSTALL_TS_RESOURCES_SMESH_msg_ja, 配置: Release x64 ------ 51>------ 已启动生成: 项目: QT_INSTALL_TS_RESOURCES_StdMeshers_images, 配置: Release x64 ------ 47>Updating 'D:/Build_Salome/SALOME-9.10.0/BUILD/SMESH/src/SMESHGUI/SMESH_images.qm'... 44>Updating 'D:/Build_Salome/SALOME-9.10.0/BUILD/SMESH/src/SMESHGUI/SMESHGUI_Homard_msg_en.qm'... 48>Updating 'D:/Build_Salome/SALOME-9.10.0/BUILD/SMESH/src/SMESHGUI/SMESH_msg_en.qm'... 46>Updating 'D:/Build_Salome/SALOME-9.10.0/BUILD/SMESH/src/SMESHGUI/SMESHGUI_Homard_msg_ja.qm'... 44> Generated 62 translation(s) (62 finished and 0 unfinished) 46> Generated 215 translation(s) (215 finished and 0 unfinished) 47> Generated 178 translation(s) (178 finished and 0 unfinished) 48> Generated 2159 translation(s) (2159 finished and 0 unfinished) 49>Updating 'D:/Build_Salome/SALOME-9.10.0/BUILD/SMESH/src/SMESHGUI/SMESH_msg_fr.qm'... 49> Generated 2159 translation(s) (2157 finished and 2 unfinished) 52>------ 已启动生成: 项目: QT_INSTALL_TS_RESOURCES_StdMeshers_msg_en, 配置: Release x64 ------ 53>------ 已启动生成: 项目: QT_INSTALL_TS_RESOURCES_StdMeshers_msg_fr, 配置: Release x64 ------ 45>Updating 'D:/Build_Salome/SALOME-9.10.0/BUILD/SMESH/src/SMESHGUI/SMESHGUI_Homard_msg_fr.qm'... 45> Generated 216 translation(s) (216 finished and 0 unfinished) 54>------ 已启动生成: 项目: QT_INSTALL_TS_RESOURCES_StdMeshers_msg_ja, 配置: Release x64 ------ 50>Updating 'D:/Build_Salome/SALOME-9.10.0/BUILD/SMESH/src/SMESHGUI/SMESH_msg_ja.qm'... 50> Generated 1995 translation(s) (1970 finished and 25 unfinished) 55>------ 已启动生成: 项目: PYCOMPILE_bin_0, 配置: Release x64 ------ 56>------ 已启动生成: 项目: PYCOMPILE_doc_gui_0, 配置: Release x64 ------ 57>------ 已启动生成: 项目: PYCOMPILE_src_SMESH_PY_0, 配置: Release x64 ------ 51>Updating 'D:/Build_Salome/SALOME-9.10.0/BUILD/SMESH/src/StdMeshersGUI/StdMeshers_images.qm'... 51> Generated 83 translation(s) (83 finished and 0 unfinished) 58>------ 已启动生成: 项目: PYCOMPILE_src_SMESH_SWIG_0, 配置: Release x64 ------ 52>Updating 'D:/Build_Salome/SALOME-9.10.0/BUILD/SMESH/src/StdMeshersGUI/StdMeshers_msg_en.qm'... 52> Generated 173 translation(s) (173 finished and 0 unfinished) 54>Updating 'D:/Build_Salome/SALOME-9.10.0/BUILD/SMESH/src/StdMeshersGUI/StdMeshers_msg_ja.qm'... 54> Generated 155 translation(s) (155 finished and 0 unfinished) 53>Updating 'D:/Build_Salome/SALOME-9.10.0/BUILD/SMESH/src/StdMeshersGUI/StdMeshers_msg_fr.qm'... 53> Generated 155 translation(s) (155 finished and 0 unfinished) 59>------ 已启动生成: 项目: PYCOMPILE_src_SMESH_SWIG_1, 配置: Release x64 ------ 60>------ 已启动生成: 项目: PYCOMPILE_src_SMESH_SWIG_2, 配置: Release x64 ------ 61>------ 已启动生成: 项目: PYCOMPILE_src_SMESH_SWIG_WITHIHM_0, 配置: Release x64 ------ 62>------ 已启动生成: 项目: PYCOMPILE_src_Tools_0, 配置: Release x64 ------ 63>------ 已启动生成: 项目: PYCOMPILE_src_Tools_MGCleanerPlug_0, 配置: Release x64 ------ 64>------ 已启动生成: 项目: PYCOMPILE_src_Tools_MGCleanerPlug_1, 配置: Release x64 ------ 65>------ 已启动生成: 项目: PYCOMPILE_src_Tools_MacMesh_0, 配置: Release x64 ------ 66>------ 已启动生成: 项目: PYCOMPILE_src_Tools_MacMesh_1, 配置: Release x64 ------ 67>------ 已启动生成: 项目: PYCOMPILE_src_Tools_YamsPlug_1, 配置: Release x64 ------ 68>------ 已启动生成: 项目: PYCOMPILE_src_Tools_MeshCut_0, 配置: Release x64 ------ 69>------ 已启动生成: 项目: PYCOMPILE_src_Tools_MeshCut_1, 配置: Release x64 ------ 70>------ 已启动生成: 项目: PYCOMPILE_src_Tools_TopIIVolMeshPlug_0, 配置: Release x64 ------ 71>------ 已启动生成: 项目: INSTALL, 配置: Release x64 ------ 71>-- Install configuration: "Release" 71>-- Up-to-date: D:/Build_Salome/SALOME-9.10.0/W64/SMESH/bin/salome/test/CTestTestfile.cmake 71>-- Up-to-date: D:/Build_Salome/SALOME-9.10.0/W64/SMESH/include/salome/SMESH_version.h 71>-- Up-to-date: D:/Build_Salome/SALOME-9.10.0/W64/SMESH/adm_local/cmake_files/SalomeSMESHConfig.cmake 71>-- Up-to-date: D:/Build_Salome/SALOME-9.10.0/W64/SMESH/adm_local/cmake_files/SalomeSMESHConfigVersion.cmake 71>-- Up-to-date: D:/Build_Salome/SALOME-9.10.0/W64/SMESH/adm_local/cmake_files/SalomeSMESHTargets.cmake 71>-- Up-to-date: D:/Build_Salome/SALOME-9.10.0/W64/SMESH/adm_local/cmake_files/SalomeSMESHTargets-release.cmake 71>-- Up-to-date: D:/Build_Salome/SALOME-9.10.0/W64/SMESH/idl/salome/SMESH_Gen.idl 71>-- Up-to-date: D:/Build_Salome/SALOME-9.10.0/W64/SMESH/include/salome/SMESH_Gen.hh